Key Features
• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
• Triple 0 awg power and ground inputs
We recommend for installation
• 1 upgraded battery under the hood
• 3 extra 800ci battery in the rear
• Minimum of two 0 awg ran from the front battery to the rear battery
• All 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 6 runs into the amp
• 2 Upgraded aftermarket alternators
• Dash mounted voltage meter
Features |
Voltage |
9.0kw |
Output Power (RMS) |
4 ohm |
14.4V |
2,400Wx1 |
|
2 ohm |
14.4V |
4,800x1 |
|
1 ohm |
14.4V |
9,000Wx1 |
|
1 ohm |
16V |
9,800Wx1 |
|
1 ohm |
18V |
11,000Wx1 |
Input Sensitivity |
6V~0.2V |
|
|
Low Pass Filter |
Switchable |
|
|
( @ 24 dB Slope) |
Variable |
Hz |
35~250 |
Subsonic Filter |
Switchable |
|
|
( @ 24 dB Slope) |
Variable |
Hz |
10~50 |
Bass Boost |
Variable |
dB |
0-9dB |
Frequency Response |
|
Hz |
15-270 |
Signal to Noise Ratio |
|
dB |
100 |
Damping factor |
|
|
150< |
Efficiency @ 4ohm |
|
% |
Over 90% |
THD @ 4ohms |
Less than 0.1% |
Fuse Rating |
900 Amps |
Linked Fuse Rating |
1,800 Amps |
Indicator |
Power |
|
Yes |
|
Protection |
|
Yes |
|
Clip |
|
No |
Speaker & Power terminal |
Mold Type |
|
Yes |
|
Power |
Gauge |
0Ga x 3 |
Heatsink Length |
34.65" (880mm) |